博士論文調査情報

金　秀彬(KIM Soo-Bin)：各種潤滑油中におけるナノゼネレーターの駆動特性に関する研究と出力向上へのアプローチ(Comprehensive Study on the Working Performance of Nanogenerators in Various Lubricants and Strategies for Output Power Enhancement)

name: 金　秀彬(KIM Soo-Bin)
title: 各種潤滑油中におけるナノゼネレーターの駆動特性に関する研究と出力向上へのアプローチ(Comprehensive Study on the Working Performance of Nanogenerators in Various Lubricants and Strategies for Output Power Enhancement)
type: pre-exam
date time: 29 October 2025, from 10.30 hrs.
place: Online
chief-investigator: Prof. YANAGIMOTO Jun
assistant-investigator: Prof. DAIGUJI Hirofumi, Asso. Prof. DELAUNAY Jean-Jacques, Prof. KOUSAKA Hiroyuki, Prof. CHOI Junho
remarks: Open to university members only.(If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: choi[at]tcu.ac.jp)

Category: PRE-EXAM
Post Date: 2025.9.10

量子コンピュータによる第一量子化に基づくab initioシミュレータの研究

name: 高橋英男(TAKAHASHI Hideo)
title: 量子コンピュータによる第一量子化に基づくab initioシミュレータの研究
type: pre-exam
date time: 6 October 2025, from 9.00 hrs.
place: General Research Experiment Bldg. An Block, Small Conference Room 3 (An407), IIS, and Online
chief-investigator: Prof. SATO Fumitoshi
assistant-investigator: Prof. OSHIMA Marie, Prof. YOSHIKAWA Nobuhiro, Prof. UMENO Yoshitaka, Associate Prof. KUYA Yuichi(Kyushu University)
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: satofumi[at]iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.9.2

村井直樹(MURAI Naoki)：Topology optimization of periodic media for wave control（波動現象を制御する周期構造のトポロジー最適化）

name: 村井直樹(MURAI Naoki)
title: Topology optimization of periodic media for wave control（波動現象を制御する周期構造のトポロジー最適化）
type: pre-exam
date time: 14 October 2025, from 16.00 hrs.
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. Yamada Takayuki
assistant-investigator: Prof. IZUMI Satoshi, Prof. YANAGISAWA Hideyoshi, Prof. DELAUNAY Jean-Jacquesm Pof. SUZUKI Katsuyuki
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: secretary (a) mid. t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.9.1

福井隆史(FUKUI Takashi)：樹脂製多孔式再生器を用いた機械設計教育用低温度差スターリングエンジンの開発(Development of Low-Temperature-Difference Stirling Engine with Resin Multi-Hole Regenerator for Mechanical Design Education)

name: FUKUI Takashi
title: Development of Low-Temperature-Difference Stirling Engine with Resin Multi-Hole Regenerator for Mechanical Design Education
type: pre-exam
date time: 17:30 -, September 30, 2025
place: Engineering Bldg. 2, 3F, Room 309
chief-investigator: Prof. MURAKAMI Tamotsu
assistant-investigator: Prof. NAGATO Keisuke, Associate Prof. CHIASHI Shohei, Prof. YAMASAKI Yudai, Prof. HARAMURA Yoshihiko
remarks: Those who wish to participate, please contact Prof. Murakami at murakami@mech.t.u-tokyo.ac.jp.

Category: PRE-EXAM
Post Date: 2025.8.27

郭奇彤（Qitong Guo)：An Efficient and Flexible Learning Framework for Hitting Motions in Table Tennis Robots（卓球における打撃動作の効率的かつ柔軟な学習フレームワーク）

name: 郭奇彤（Qitong Guo)
title: An Efficient and Flexible Learning Framework for Hitting Motions in Table Tennis Robots（卓球における打撃動作の効率的かつ柔軟な学習フレームワーク）
type: pre-exam
date time: 28 October 2025, from 15.00 hrs.
place: Engineering Bldg. 2, Room 309
chief-investigator: Associate Prof. YAMAKAWA Yuji
assistant-investigator: Prof. ARAI Fumihito, Prof. HARADA Kanako, Associate Prof. SENOO Taku, Lecturer ZHAO Moju
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: y-ymkw@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.8.26

史枭杭 (SHI Xiaohang)：A High-speed 3D Vision-based High-speed Multi-fingered Hand Manipulation System (高速3次元ビジョンを用いた高速多指ハンドマニピュレーションシステム)

name: 史枭杭 (SHI Xiaohang)
title: A High-speed 3D Vision-based High-speed Multi-fingered Hand Manipulation System (高速3次元ビジョンを用いた高速多指ハンドマニピュレーションシステム)
type: pre-exam
date time: 2 October 2025, from 9.00 hrs.
place: Engineering Bldg. 2, Seminar Room 31B
chief-investigator: Associate Prof. YAMAKAWA Yuji
assistant-investigator: Prof. VENTURE Gentiane, Prof. YAMASHITA Atsushi, Associate Prof. OISHI Takeshi, Lecturer ITO Takuma
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: y-ymkw@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.8.26

胡銘軒（HU Ming-Hsuan）：バッチ運転型ハイブリッド圧縮・吸着ヒートポンプの性能評価と最適化（Performance study and optimization of a batch operation hybrid compression adsorption heat pump）

name: 胡銘軒（HU Ming-Hsuan）
title: バッチ運転型ハイブリッド圧縮・吸着ヒートポンプの性能評価と最適化（Performance study and optimization of a batch operation hybrid compression adsorption heat pump）
type: exam
date time: 7 August 2025, from 14.30 hrs.
place: Engineering Bldg. 2, Room 310 and Online
chief-investigator: Prof.DAIGUJI Hirofumi
assistant-investigator: Prof.SHIKAZONO Naoki, Associate Prof.CHIASHI Shohei, Associate Prof.HSU Wei Lun, Director General（AIST）ENDO Akira
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: daiguji@thml.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.24

歐哲瑋（OU Che-Wei）：ナノ流体システムにおける電気浸透流速度の特性評価と分析（Characterization and Analysis of Electroosmotic Velocity in Nanofluidic Systems）

name: 歐哲瑋（OU Che-Wei）
title: ナノ流体システムにおける電気浸透流速度の特性評価と分析（Characterization and Analysis of Electroosmotic Velocity in Nanofluidic Systems）
type: exam
date time: 1 August 2025, from 10.00 hrs.
place: Online
chief-investigator: Associate Prof.HSU Wei Lun
assistant-investigator: Prof.TAKAGI Shu，Prof.DAIGUJI Hirofumi，Associate Prof.CHIASHI Shohei，Prof.KAZOE Yutaka
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: wlhsu@thml.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.24

Yuguo DAI：Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）

name: Yuguo DAI
title: Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）
type: exam
date time: 5 August 2025, from 15.00 hrs.
place: Engineering Bldg. 2, Room 31A
chief-investigator: Prof. ARAI Fumihito
assistant-investigator: Prof. HARADA Kanako, Associate Prof. OANA Hidehiro, Lecturer SUGIURA Hirotaka, Prof. IKEUCHI Masashi
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address:arai-fumihito@g.ecc.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.23

王　超(WANG Chao)：Study on bevel gear milling of additively manufactured blanks（積層造形ブランクを用いたベベルギヤのミリング加工に関する研究）

name: 王　超(WANG Chao)
title: Study on bevel gear milling of additively manufactured blanks（積層造形ブランクを用いたベベルギヤのミリング加工に関する研究）
type: exam
date time: 5th August 2025, from 9.00 hrs.
place: Engineering Bldg. 2, Room 310
chief-investigator: Prof.SUGITA Naohiko
assistant-investigator: Prof.YOSHIOKA Hayato, Prof.NAGATO Keisuke, Lecturer KIZAKI Toru, Prof.KANEKO Junichi

Category: EXAM
Post Date: 2025.7.23

劉　佳慧（LIU Jiahui）：Research on distributed active vibration control with in-process dynamics identification for high-precision machining（高精度加工のためのインプロセス動特性推定を伴う分散型アクティブ振動制御に関する研究）

name: 劉　佳慧（LIU Jiahui）
title: Research on distributed active vibration control with in-process dynamics identification for high-precision machining（高精度加工のためのインプロセス動特性推定を伴う分散型アクティブ振動制御に関する研究）
type: exam
date time: 30th July 2025, from 9.00 hrs.
place: Engineering Bldg. 2, Room 310
chief-investigator: Prof.SUGITA Naohiko
assistant-investigator: Prof.YOSHIOKA Hayato, Prof.NAGATO Keisuke, Lecturer KIZAKI Toru, Prof.FUJIMOTO Hiroshi

Category: EXAM
Post Date: 2025.7.23

関　鳳渤（GUAN Fengbo）：The title of my Phd thesis is “Dissimilar heat transfer enhancement in developing laminar flows through parallel porous plates by inducing streamwise travelling wave-like disturbances” (並行多孔質板間の発達層流における進行波状撹乱の励起による非相似伝熱促進 )

name: 関　鳳渤（GUAN Fengbo）
title: The title of my Phd thesis is "Dissimilar heat transfer enhancement in developing laminar flows through parallel porous plates by inducing streamwise travelling wave-like disturbances" (並行多孔質板間の発達層流における進行波状撹乱の励起による非相似伝熱促進 )
type: exam
date time: 4 August 2025, from 16.00 hrs.
place: Institute of Industrial Science, Dw404
chief-investigator: Prof. HASEGAWA Yosuke
assistant-investigator: Prof. SHIKAZONO Naoki, Assoc.prof. AZIZ MUHAMMAD, Lecturer MOUTERDE Timothée, Assoc.prof. STROH Alexander

Category: EXAM
Post Date: 2025.7.18

方　婷婷（FANG Tingting）：Understanding of the dissimilarity between momentum and scalar transfer in wall turbulence based on non-locality of eddy diffusivity(非局在性渦拡散に基づく平行平板間乱流場における運動量とスカラー輸送の非相似性の理解)

name: 方　婷婷（FANG Tingting）
title: Understanding of the dissimilarity between momentum and scalar transfer in wall turbulence based on non-locality of eddy diffusivity(非局在性渦拡散に基づく平行平板間乱流場における運動量とスカラー輸送の非相似性の理解)
type: exam
date time: 31 July 2025, from 16.00 hrs.
place: Institute of Industrial Science, Dw404
chief-investigator: Prof.HASEGAWA Yosuke
assistant-investigator: Prof.TAKAGI Shu, Prof.HAMBA Fujihiro, Lecturer WATAMURA Tomoaki, Prof.IWAMOTO Kaoru

Category: EXAM
Post Date: 2025.7.18

田中暉久(TANAKA Akihisa)：固体高分子形燃料電池の電極構造と運転条件の一貫設計のためのインピーダンスモデリング

name: 田中暉久(TANAKA Akihisa)
title: 固体高分子形燃料電池の電極構造と運転条件の一貫設計のためのインピーダンスモデリング
type: exam
date time: 31 Aug. 15:00-17:00
place: Engineering Bldg. 2, Room 31B and online
chief-investigator: Prof. NAGATO Keisuke
assistant-investigator: Prof. SUGITA Naohiko, Prof. SHIKAZONO Naoki, Assoc. Prof. KINEFUCHI Ikuya, Prof. INOUE Gen
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: nakamura@hnl.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.17

山田和佳(YANADA Nodoka)：新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価

name: 山田和佳(YANADA Nodoka)
title: 新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価
type: exam
date time: 24 Jul. 17:15-19:15
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. NAGATO Keisuke
assistant-investigator: Prof. MURAKAMI Tamotsu, Prof. YANAGISAWA Hideyoshi, Prof. UMEDA Yasushi, Prof. KUZUOKA Hideaki, Emeritus Prof. HARADA Etsuko
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: nakamura@hnl.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.17

PANG JIALI(パン　ジアリ)：Modeling of anisotropic behavior of magnesium alloy sheet under varied temperature based on texture information （マグネシウム合金薄板の異方性と温度依存性の集合組織情報に基づくモデリング）

name: PANG JIALI(パン　ジアリ)
title: Modeling of anisotropic behavior of magnesium alloy sheet under varied temperature based on texture information （マグネシウム合金薄板の異方性と温度依存性の集合組織情報に基づくモデリング）
type: exam
date time: Wednesday, July 30, 2025, at 2:00 PM
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. Jun Yanagimoto
assistant-investigator: Prof. Nobuhiro Yoshikawa,　Prof. Yoshitaka Umeno,　Lect. Hiroki Sakakima,　Assoc. Prof. Shoichi Nambu,
remarks: If you wish to attend as an observer, please send your name and affiliation by the day before. Contact:jun.52074.yanagimoto@cem.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.9

張伯文（ZHANG Bowen）： Low-temperature synthesis of weakly confined carbyne inside single-walled carbon nanotubes （単層CNT内部に弱く閉じ込められたカルビンの低温合成）

name: 張伯文（ZHANG Bowen）
title: Low-temperature synthesis of weakly confined carbyne inside single-walled carbon nanotubes （単層CNT内部に弱く閉じ込められたカルビンの低温合成）
type: exam
date time: 12 August 2025, from18.00hrs
place: Engineering Bldg. 2, Room 31A
chief-investigator: Associate Professor CHIASHI Shohei
assistant-investigator: Prof. DAIGUJI Hirofumi, Prof. SHIOMI Junichiro, Prof. NAGASHIO Kosuke, Designated Professor MARUYAMA Shigeo
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: secretary@photon.t.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.8

陳嘉偉（CHEN Jiawei）：Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation（塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）

name: 陳嘉偉（CHEN Jiawei）
title: Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation（塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）
type: exam
date time: 30 July 2025, from 9:30
place: Institute of Industrial Science, Bldg. An, Room 403
chief-investigator: Associate Prof. FURUSHIMA Tsuyoshi
assistant-investigator: Prof. YANAGIMOTO Jun, Prof. UMENO Yoshitaka, Prof. KAJIHARA Yusuke, Associate Prof. TSUCHIYA Kensuke
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: tsuyoful@iis.u-tokyo.ac.jp

Category: EXAM
Post Date: 2025.7.7

小池匠(KOIKE Takumi)：超短パルスレーザ誘起フィラメントの複素屈折率計測および加工への応用

name: 小池匠(KOIKE Takumi)
title: 超短パルスレーザ誘起フィラメントの複素屈折率計測および加工への応用
type: exam
date time: 23 July 2025, from 17.30 hrs.
place: Engineering Bldg. 2, Room 310
chief-investigator: Lecturer ITO Yusuke
assistant-investigator: Prof. SUGITA Naohiko, Prof. DELAUNAY Jean-Jacques, Prof. ISHIKAWA Kenichi, Prof. SANO Tomokazu

Category: EXAM
Post Date: 2025.7.7

森　賢哉（MORI Kenya）：力学的インタラクションを伴うシステム同定のためのデータ収集の方法論に関する研究（A Study on Data Collection Methodologies for System Identification with Dynamics Interaction）

name: 森　賢哉（MORI Kenya）
title: 力学的インタラクションを伴うシステム同定のためのデータ収集の方法論に関する研究（A Study on Data Collection Methodologies for System Identification with Dynamics Interaction）
type: exam
date time: 28 July 2025, from 16.00
place: Engineering Bldg.2. Room 31A　（hybrid）
chief-investigator: Prof.VENTURE Gentiane
assistant-investigator: Prof. ARAI Fumihito, Prof. YOSHIDA Eiichi(Tokyo University of Science), Assoc.prof. YAMAKAWA Yuji, Visiting Assoc.Prof. AYUSAWA Ko, Lecturer ZHAO Moju
remarks: Those who wish to observe the examination should fill out the form by the day before.　https://forms.gle/qv6MRXj4ha16Avoq8

Category: EXAM
Post Date: 2025.7.3

博士論文審査情報
Doctoral Dissertation Review Information

金　秀彬(KIM Soo-Bin)：各種潤滑油中におけるナノゼネレーターの駆動特性に関する研究と出力向上へのアプローチ(Comprehensive Study on the Working Performance of Nanogenerators in Various Lubricants and Strategies for Output Power Enhancement)

量子コンピュータによる第一量子化に基づくab initioシミュレータの研究

村井直樹(MURAI Naoki)：Topology optimization of periodic media for wave control（波動現象を制御する周期構造のトポロジー最適化）

福井隆史(FUKUI Takashi)：樹脂製多孔式再生器を用いた機械設計教育用低温度差スターリングエンジンの開発(Development of Low-Temperature-Difference Stirling Engine with Resin Multi-Hole Regenerator for Mechanical Design Education)

郭奇彤（Qitong Guo)：An Efficient and Flexible Learning Framework for Hitting Motions in Table Tennis Robots（卓球における打撃動作の効率的かつ柔軟な学習フレームワーク）

史枭杭 (SHI Xiaohang)：A High-speed 3D Vision-based High-speed Multi-fingered Hand Manipulation System (高速3次元ビジョンを用いた高速多指ハンドマニピュレーションシステム)

胡銘軒（HU Ming-Hsuan）：バッチ運転型ハイブリッド圧縮・吸着ヒートポンプの性能評価と最適化（Performance study and optimization of a batch operation hybrid compression adsorption heat pump）

歐哲瑋（OU Che-Wei）：ナノ流体システムにおける電気浸透流速度の特性評価と分析（Characterization and Analysis of Electroosmotic Velocity in Nanofluidic Systems）

Yuguo DAI：Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）

王　超(WANG Chao)：Study on bevel gear milling of additively manufactured blanks（積層造形ブランクを用いたベベルギヤのミリング加工に関する研究）

劉　佳慧（LIU Jiahui）：Research on distributed active vibration control with in-process dynamics identification for high-precision machining（高精度加工のためのインプロセス動特性推定を伴う分散型アクティブ振動制御に関する研究）

方　婷婷（FANG Tingting）：Understanding of the dissimilarity between momentum and scalar transfer in wall turbulence based on non-locality of eddy diffusivity(非局在性渦拡散に基づく平行平板間乱流場における運動量とスカラー輸送の非相似性の理解)

田中暉久(TANAKA Akihisa)：固体高分子形燃料電池の電極構造と運転条件の一貫設計のためのインピーダンスモデリング

山田和佳(YANADA Nodoka)：新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価

PANG JIALI(パン　ジアリ)：Modeling of anisotropic behavior of magnesium alloy sheet under varied temperature based on texture information （マグネシウム合金薄板の異方性と温度依存性の集合組織情報に基づくモデリング）

張伯文（ZHANG Bowen）： Low-temperature synthesis of weakly confined carbyne inside single-walled carbon nanotubes （単層CNT内部に弱く閉じ込められたカルビンの低温合成）

陳嘉偉（CHEN Jiawei）：Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation（塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）

小池匠(KOIKE Takumi)：超短パルスレーザ誘起フィラメントの複素屈折率計測および加工への応用

森　賢哉（MORI Kenya）：力学的インタラクションを伴うシステム同定のためのデータ収集の方法論に関する研究（A Study on Data Collection Methodologies for System Identification with Dynamics Interaction）

Resent Article

Archive

Category

博士論文審査情報 Doctoral Dissertation Review Information

Resent Article

Archive

Category

博士論文審査情報
Doctoral Dissertation Review Information