予備審査 | Department of Mechanical Engineering [MECHANICAL A], University of Tokyo

陳嘉偉 (CHEN Jiawei)：Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation　（和文：塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）

name: 陳嘉偉 (CHEN Jiawei)
title: Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation　（和文：塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）
type: pre-exam
date time: 8 May 2025, from 10.00 hrs
place: Institute of Industrial Science　An403
chief-investigator: Associate Prof. FURUSHIMA Tsuyoshi
assistant-investigator: Prof. YANAGIMOTO, Prof. UMENO, Prof. KAJIHARA, Associate Prof. Tsuchiya
remarks: f you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: tsuyoful@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.31

浅野敬大：折り紙構造を利用した可変長・可変剛性ロボットアームシステムの開発

name: 浅野敬大
title: 折り紙構造を利用した可変長・可変剛性ロボットアームシステムの開発
type: pre-exam
date time: 8 May 2025, from 15.00 hrs.
place: Engineering Bldg. 2, Seminar Room 31B
chief-investigator: Associate Prof．YAMAKAWA Yuji
assistant-investigator: Prof. ARAI Fumihito, Prof. NAKANO Kimihiko, Prof. OKADA Kei, Lecturer ZHAO Moju
remarks: Only those affiliated with the University of Tokyo may attend the pre-exam.

Category: PRE-EXAM
Post Date: 2025.3.24

曹永鵬 (Cao Yongpeng)：Semantic Information Enhanced Anticipatory Human Action Recognition for Real-time Robot Assistance(実時間でのロボット支援のための意味情報に基づき拡張した人間の行動予測認識)

name: 曹永鵬 (Cao Yongpeng)
title: Semantic Information Enhanced Anticipatory Human Action Recognition for Real-time Robot Assistance(実時間でのロボット支援のための意味情報に基づき拡張した人間の行動予測認識)
type: pre-exam
date time: 7 May 2025, from 15.30 hrs.
place: Engineering Bldg. 2, Seminar Room 31B
chief-investigator: Associate Prof．YAMAKAWA Yuji
assistant-investigator: Prof. NAKANO Kimihiko, Associate Prof. MAKINO Yasutoshi, Associate Prof. SUGANO Yusuke, Project Lecturer ASANO Yuki
remarks: Only those affiliated with the University of Tokyo may attend the pre-exam.

Category: PRE-EXAM
Post Date: 2025.3.24

苏俊哲 (Su Junzhe)：A Ground-View High-speed Vision Sensor-Based Motion Estimator for Accurate Environment Perception in Ground Vehicles(地上車両における正確な環境認識のための路面視点高速ビジョンセンサに基づく運動推定器)

name: 苏俊哲 (Su Junzhe)
title: A Ground-View High-speed Vision Sensor-Based Motion Estimator for Accurate Environment Perception in Ground Vehicles(地上車両における正確な環境認識のための路面視点高速ビジョンセンサに基づく運動推定器)
type: pre-exam
date time: 1 May 2025, from 15.00 hrs.
place: Engineering Bldg. 2, Seminar Room 31B
chief-investigator: Associate Prof．YAMAKAWA Yuji
assistant-investigator: Prof. NAKANO Kimihiko, Prof. FUKAO Takanori, Associate Prof. OISHI Takeshi, Lecturer ITO Takuma
remarks: Only those affiliated with the University of Tokyo may attend the pre-exam.

Category: PRE-EXAM
Post Date: 2025.3.24

周強（ZHOU Qiang）：電気化学的硝酸還元における多階層触媒の相乗効果とメカニズム（Synergistic effects and mechanisms of multi-scale catalysts in electrochemical nitrate reduction）

name: 周強（ZHOU Qiang）
title: 電気化学的硝酸還元における多階層触媒の相乗効果とメカニズム（Synergistic effects and mechanisms of multi-scale catalysts in electrochemical nitrate reduction）
type: pre-exam
date time: 9 May 2025, from 17:00 to 19:00
place: Online
chief-investigator: Assoc.Prof.DELAUNAY Jean-Jacques
assistant-investigator: Prof.DAIGUJI Hirofumi, Assoc.Prof.CHIASHI Shohei, Prof.TABATA Hitoshi, Prof.CHOI Junho (Tokyo City Univ.)
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: jean@mech.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.17

陳牧心（CHEN Mu-Hsin）：高Q値共振メタサーフェスに基づく指向性および偏光の制御が可能なマイクロレーザーの設計と製作（Design and fabrication of microlasers with controllable directions and polarization based on high-quality-factor resonant metasurface）

name: 陳牧心（CHEN Mu-Hsin）
title: 高Q値共振メタサーフェスに基づく指向性および偏光の制御が可能なマイクロレーザーの設計と製作（Design and fabrication of microlasers with controllable directions and polarization based on high-quality-factor resonant metasurface）
type: pre-exam
date time: 9 May 2025, from 15:00 to 17:00
place: Online
chief-investigator: Assoc.Prof.DELAUNAY Jean-Jacques
assistant-investigator: Prof.DAIGUJI Hirofumi, Assoc.Prof.CHIASHI Shohei, Prof.TABATA Hitoshi, Prof.CHOI Junho (Tokyo City Univ.)
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: jean@mech.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.17

林伯威（LIN Bo-Wei）：二次元フォトニック結晶における光結合制御を介した低損失表面共鳴（Demonstration of low-loss surface resonances via light coupling manipulation in two-dimensional photonic crystals）

name: 林伯威（LIN Bo-Wei）
title: 二次元フォトニック結晶における光結合制御を介した低損失表面共鳴（Demonstration of low-loss surface resonances via light coupling manipulation in two-dimensional photonic crystals）
type: pre-exam
date time: 12 May 2025, from 15:00 to 17:00
place: Online
chief-investigator: Assoc.Prof.DELAUNAY Jean-Jacques
assistant-investigator: Prof.DAIGUJI Hirofumi, Assoc.Prof.CHIASHI Shohei, Assoc.Prof.MATSUI Hiroaki, Prof.CHOI Junho (Tokyo City Univ.)
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: jean@mech.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.17

Yuguo DAI：Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）

name: Yuguo DAI
title: Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）
type: pre-exam
date time: 1 May 2025, from 14.30 hrs.
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. ARAI Fumihito
assistant-investigator: Prof. HARADA Kanako, Associate Prof. OANA Hidehiro, Lecturer SUGIURA Hirotaka, Prof. IKEUCHI Masashi
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address:arai-fumihito@g.ecc.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.14

小野寺周也（ONODERA Shuya）：Topology Optimization of Thermoelastic Mechanical Structures for High-Temperature Conditions (高温条件に適した熱弾性機械構造のトポロジー最適化)

name: 小野寺周也（ONODERA Shuya）
title: Topology Optimization of Thermoelastic Mechanical Structures for High-Temperature Conditions (高温条件に適した熱弾性機械構造のトポロジー最適化)
type: pre-exam
date time: 7 April 2025, from 14.00 hrs.
place: Engineering Bldg. 9., meeting room
chief-investigator: Prof. YAMADA Takayuki
assistant-investigator: Prof. SUGITA Naohiko, Prof. TSUCHIYA Kensuke, Lecturer KIZAKI Toru and Prof. FUJII Garuda
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: t.yamada（a）mech.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.3.14

許星長（XU XINGCHANG)：Radical distribution measurement in an ammonia counter flow burner using multi-photon absorption laser induced fluorescence（多光子吸収レーザー誘起蛍光法を用いたアンモニア対向流火炎におけるラジカル計測）

name: 許星長（XU XINGCHANG)
title: Radical distribution measurement in an ammonia counter flow burner using multi-photon absorption laser induced fluorescence（多光子吸収レーザー誘起蛍光法を用いたアンモニア対向流火炎におけるラジカル計測）
type: pre-exam
date time: 21 January 2025, from 9:30 hrs.
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. SUZUKI Yuji
assistant-investigator: Prof. TAKAGI Shu, Prof. DAIGUJI Hirofumi, Lecturer LEE Minhyeok, Prof. TSUE Mitsuhiro, Prof. NAKAMURA Hisashi
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: ysuzuki@mesl.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2025.1.14

山田和佳：新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価

name: 山田和佳
title: 新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価
type: pre-exam
date time: 14 Jan. 16:00-18:00
place: Engineering Bldg. 2, Room 309
chief-investigator: Assoc.Prof. NAGATO Keisuke
assistant-investigator: Prof. MURAKAMI Tamotsu, Assoc.Prof. YANAGISAWA Hideyoshi, Prof. UMEDA Yasushi, Prof. KUZUOKA Hideaki, Emeritus Prof. HARADA Etsuko
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: nakamura@hnl.t.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2024.12.20

胡北（HU Bei）：Mechanism and Control Strategies of Surface Instability for Sn-Based Lapping Tools（スズ系ラッピング工具の表面不安定性のメカニズム解明と制御方法）

name: 胡北（HU Bei）
title: Mechanism and Control Strategies of Surface Instability for Sn-Based Lapping Tools（スズ系ラッピング工具の表面不安定性のメカニズム解明と制御方法）
type: pre-exam
date time: 1 time: 8 November 2024, from 10.00 hrs.
2 time: 11 November 2024, from 15.00 hrs.
place: 1 time: online
2 time: Institute of Industrial Science, An Bldg., Room An405 and online (hybrid)
chief-investigator: Assoc. Prof. TSUCHIYA Kensuke
assistant-investigator: 1 time: Assoc. Prof. KAKIUCHI Toshifumi
2 time: Prof. YANAGIMOTO Jun, Assoc. Prof. FURUSHIMA Tsuyoshi, Project Researcher (Emeritus Prof. ) NAKAO Masayuki
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: tsu@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2024.11.1

毛経天（MAO Jingtian）：Research on the Effects of Ultra-High Pressure Coolant inEnd Milling of Difficult-to-Cut Materials（難切削材料のエンドミーリング加工における超高圧クーラントの効果に関する研究）

name: 毛経天（MAO Jingtian）
title: Research on the Effects of Ultra-High Pressure Coolant inEnd Milling of Difficult-to-Cut Materials（難切削材料のエンドミーリング加工における超高圧クーラントの効果に関する研究）
type: pre-exam
date time: 5 November 2024, from 11.00 hrs.
place: Institute of Industrial Science, An Bldg., Room An405 and online (hybrid)
chief-investigator: Assoc. Prof. TSUCHIYA Kensuke
assistant-investigator: Prof. SUGITA Naohiko, Prof. YOSHIOKA Hayato, Prof. MATSUMURA Takashi, Prof. FANG Zhenglong
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: tsu@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2024.11.1

川合晃生(KOSEI Kawai)：短波赤外顕微分光による含水試料の水分活性と水分子回転緩和時間の測定に関する研究

name: 川合晃生(KOSEI Kawai)
title: 短波赤外顕微分光による含水試料の水分活性と水分子回転緩和時間の測定に関する研究
type: pre-exam
date time: 5 November 2024, from 17.00 hrs.
place: Institute of Industrial Science Bldg.An405 and online: (hybrid)
chief-investigator: Prof.SHIRAKASHI Ryo
assistant-investigator: Prof. Hirofumi Daiguji, Prof. Junichiro Shiomi, Prof. Yosuke Hasegawa, Prof. Kosaku Kurata
remarks: If you wish to observe the pre-defense, please inform us of your name and affiliation by 31 October by E-mail. E-mail address: snishio@iis.u-tokyo.ac.jp Only members of our university can observe the pre-defence.

Category: PRE-EXAM
Post Date: 2024.10.28

石井響弥：環境磁場を用いた自動運転車両における自己位置推定の研究

name: 石井響弥
title: 環境磁場を用いた自動運転車両における自己位置推定の研究
type: pre-exam
date time: 8 November 2024,from 10.00 hrs.
place: Engineering Bldg. 2, Room 310
chief-investigator: Prof.SUDA Yoshihiro
assistant-investigator: Prof.NAKANO Kimihiko,Associate Prof.YAMAKAWA,Lecturer ITO Takuma,Prof.SHINO Motoki

Category: PRE-EXAM
Post Date: 2024.10.22

加藤紀彦：ETC2.0プローブデータを用いた運転特性分析に関する研究

name: 加藤紀彦
title: ETC2.0プローブデータを用いた運転特性分析に関する研究
type: pre-exam
date time: 28 October 2024,from 14.00 hrs.
place: Komaba Research Campus,An Block,Room 405
chief-investigator: Prof.SUDA Yoshihiro
assistant-investigator: Prof.OGUCHI Takashi,Prof.NAKANO Kimihiko,Associate Prof.YAMAKAWA Yuji,Lecturer ITO Takuma
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: sudasec@iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2024.10.22

國行翔哉（KUNIYUKI Shoya）：鉄道車両の車輪/レール間の接触状態推定値による走行安全性の評価手法(A method for evaluating running safety based on estimated wheel/rail contact conditions of railway vehicles)

name: 國行翔哉（KUNIYUKI Shoya）
title: 鉄道車両の車輪/レール間の接触状態推定値による走行安全性の評価手法(A method for evaluating running safety based on estimated wheel/rail contact conditions of railway vehicles)
type: pre-exam
date time: 5 November 2024, from 17:00 hrs.
place: Engineering Bldg. 2, Room 31A
chief-investigator: Prof. NAKANO Kimihiko
assistant-investigator: Prof. SUDA Yoshihiro, Lecturer ITO Takuma, Prof. KOSEKI Takaaki, Prof. MIYAMOTO Takefumi
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least one day before the date of the examination. E-mail address: kn-sec(a)iis.u-tokyo.ac.jp

Category: PRE-EXAM
Post Date: 2024.10.22

Abdelrahman Mohamed Farghali Abdelati：Optimization of hydrogenated amorphous carbon film deposition on stainless steel for fabrication of DLC micro-array punch

name: Abdelrahman Mohamed Farghali Abdelati
title: Optimization of hydrogenated amorphous carbon film deposition on stainless steel for fabrication of DLC micro-array punch
type: pre-exam
date time: 5 November 2024, from 12.30 hrs.
place: Engineering Bldg. 2, Room 309
chief-investigator: Prof. YANAGIMOTO Jun
assistant-investigator: Prof.DAIGUJI Hirofumi, Associate Prof.DELAUNAY Jean-Jacques, Prof.CHOI Junho, Associate Prof.HIRATA Yuki
remarks: Only members of our university can observe the exam.

Category: PRE-EXAM
Post Date: 2024.10.18

谷山建作(TANIYAMA, Kensaku)：離散操作と連続操作における主体感の数理モデルの構築と検証：自由エネルギー原理と能動的推論を用いたアプローチ(Development and verification of a mathematical model of the sense of agency in discrete and continuous operations: An approach using the free energy principle and active inference)

name: 谷山建作(TANIYAMA, Kensaku)
title: 離散操作と連続操作における主体感の数理モデルの構築と検証：自由エネルギー原理と能動的推論を用いたアプローチ(Development and verification of a mathematical model of the sense of agency in discrete and continuous operations: An approach using the free energy principle and active inference)
type: pre-exam
date time: 31 October 2024, from 19:00
place: Engineering Bldg. 2, Room 309
chief-investigator: Assoc. Prof. Hideyoshi Yanagisawa
assistant-investigator: Prof. Tamottsu Murakami, Prof. Kimihiko Nakano, Prof. Hiroshi Imamizu, Assoc. Prof. Keisuke Nagato
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least three day before the date of the examination. https://forms.gle/JVYjjfX2T6SNrEqW6

Category: PRE-EXAM
Post Date: 2024.10.17

何孟珣(HO, Meng-xun)：Design for Well-being and Sustainability : Changes of the Decision-making in the Peer-to-peer Circular EconomyEconomy(ウェルビーイングと持続可能性のためのデザイン:ピアツーピア循環経済における意思決定の変化)

name: 何孟珣(HO, Meng-xun)
title: Design for Well-being and Sustainability : Changes of the Decision-making in the Peer-to-peer Circular EconomyEconomy(ウェルビーイングと持続可能性のためのデザイン:ピアツーピア循環経済における意思決定の変化)
type: pre-exam
date time: 30 October 2024, from 9:00
place: Engineering Bldg. 2, Room 309
chief-investigator: Assoc. Prof. Hideyoshi Yanagisawa
assistant-investigator: Prof. Tamottsu Murakami, Prof. Yasusi Umeda, Prof. Shinichi Warisawa, Assoc. Prof. Keisuke Nagato
remarks: If you wish to observe the examination, please inform us of your name and affiliation at least three day before the date of the examination.　https://forms.gle/qwaPSGgUQU7UQgxv6

Category: PRE-EXAM
Post Date: 2024.10.17

博士論文審査情報
Doctoral Dissertation Review Information

陳嘉偉 (CHEN Jiawei)：Numerical and analytical modelling on microscopic ductile damage in polycrystal metals with plastic deformation　（和文：塑性変形における多結晶金属材料の微視的延性破壊に関する数値解析モデル）

浅野敬大：折り紙構造を利用した可変長・可変剛性ロボットアームシステムの開発

曹永鵬 (Cao Yongpeng)：Semantic Information Enhanced Anticipatory Human Action Recognition for Real-time Robot Assistance(実時間でのロボット支援のための意味情報に基づき拡張した人間の行動予測認識)

苏俊哲 (Su Junzhe)：A Ground-View High-speed Vision Sensor-Based Motion Estimator for Accurate Environment Perception in Ground Vehicles(地上車両における正確な環境認識のための路面視点高速ビジョンセンサに基づく運動推定器)

周強（ZHOU Qiang）：電気化学的硝酸還元における多階層触媒の相乗効果とメカニズム（Synergistic effects and mechanisms of multi-scale catalysts in electrochemical nitrate reduction）

林伯威（LIN Bo-Wei）：二次元フォトニック結晶における光結合制御を介した低損失表面共鳴（Demonstration of low-loss surface resonances via light coupling manipulation in two-dimensional photonic crystals）

Yuguo DAI：Magnetically Actuated Intestinal Sampling Capsule with a Brush Structure（ブラシ構造を有する磁気駆動型腸内サンプリングカプセル）

小野寺周也（ONODERA Shuya）：Topology Optimization of Thermoelastic Mechanical Structures for High-Temperature Conditions (高温条件に適した熱弾性機械構造のトポロジー最適化)

許星長（XU XINGCHANG)：Radical distribution measurement in an ammonia counter flow burner using multi-photon absorption laser induced fluorescence（多光子吸収レーザー誘起蛍光法を用いたアンモニア対向流火炎におけるラジカル計測）

山田和佳：新奇な製品に対するユーザの理解が成立するための気づきプロセスのモデリングとリアルタイム評価

胡北（HU Bei）：Mechanism and Control Strategies of Surface Instability for Sn-Based Lapping Tools（スズ系ラッピング工具の表面不安定性のメカニズム解明と制御方法）

毛経天（MAO Jingtian）：Research on the Effects of Ultra-High Pressure Coolant inEnd Milling of Difficult-to-Cut Materials（難切削材料のエンドミーリング加工における超高圧クーラントの効果に関する研究）

川合晃生(KOSEI Kawai)：短波赤外顕微分光による含水試料の水分活性と水分子回転緩和時間の測定に関する研究

石井響弥：環境磁場を用いた自動運転車両における自己位置推定の研究

加藤紀彦：ETC2.0プローブデータを用いた運転特性分析に関する研究

國行翔哉（KUNIYUKI Shoya）：鉄道車両の車輪/レール間の接触状態推定値による走行安全性の評価手法(A method for evaluating running safety based on estimated wheel/rail contact conditions of railway vehicles)

Abdelrahman Mohamed Farghali Abdelati：Optimization of hydrogenated amorphous carbon film deposition on stainless steel for fabrication of DLC micro-array punch

何孟珣(HO, Meng-xun)：Design for Well-being and Sustainability : Changes of the Decision-making in the Peer-to-peer Circular EconomyEconomy(ウェルビーイングと持続可能性のためのデザイン:ピアツーピア循環経済における意思決定の変化)

Resent Article

Archive

Category

博士論文審査情報 Doctoral Dissertation Review Information

Resent Article

Archive

Category

博士論文審査情報
Doctoral Dissertation Review Information