- TOP
- Teachers
教員一覧
FACULTY LIST
Masayuki NakaoProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Axiomatic design, Creative design, Failureology
- Manufacturing process on automobile components
- Nano and micro fabrication
Chisachi KatoProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Numerical prediction of unsteady turbulence and its engineering application
- Numerical prediction of unsteady turbulence and its engineering application
- Micro-energy conversion devices
Yoshihiro SudaProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Boundary field of Human, Vehicle and Infrastructure
- Automated Driving , Driver behaviors and Human Factors
- Rail system and Novel type transportation systems
- Application AI and Bio-signal measurements for mobility
- Acceptance of Mobility
Shigeo MaruyamaProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Growth of hetero-nanotubes based on single-walled carbon nanotubes
- Device application of hetero-nanotubes
- Perovskite solar cells using carbon nanotubes and hetero-nanotubes
Jun YanagimotoProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Precise force and forward slip prediction model for cold rolling
- High-speed hot compression test and decoding the materials genome.
- Evolution of anisotropy by using multi-scale plasticity
- Manufacturing and forming of CFRP core - metal sandwich structured sheet
Tamotsu MurakamiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Design ideation by collaboration of human designer and information technology
- Game design methodology to avoid negative UX without spoiling positive UX
- Usability design technology applicable through upstream to downstream of design process
Marie OshimaProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- Interfaculty Initiative in Information Studies
- RESEARCH
-
- Development of integrated circulatory simulation system considering systemic circulation based on medical images
- Development of 3D blood vessel shape modeling and visualization method from medical images for predictive medicine
- Development of coupled analysis method for endovascular treatment
- Visualization measurement of microscale flow with confocal Micro-PIV and digital holographic microscopy
Nobuhiro YoshikawaProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
Center for Research on Innovative Simulation Software
- RESEARCH
-
- Developing jet engine members made by CFRP
- Developing high pressure hydrogen CFRP tank for fuel cell vehicle
- Investigating strength prediction simulator for CFRP members
- Investigating manufacturing simulator for thermo-set and thermo-plastic CFRP
Fumitoshi SatoProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Canonical molecular orbitals calculation of protein based on the hybrid DFT
- Analysis of the reaction mechanisms of protein
- Design of enzymes, nanomaterials, and medicines
Fumihito AraiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Bio-inspired robotics: Systems inspired by living things
- Micro-nano robotics: System integration using micro-nano fabrication and MEMS devices
- Bio-medical applications: Sensors & actuators for emerging functions and intelligence
Shohei KawanoProject Professor
- Hongo Campus
- Graduate School of Engineering
- RESEARCH
-
- Human resource education for engineering
- World-leading innovative graduate study program
- Graduate program for Mechanical Systems Innovation (GMSI)
- Active learning
- KEYWORD
Yuji SuzukiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Ammonia Combustion toward Industrial Thermal Systems
- HIgh-performance Catalytic Converter for Ammonia Cracking to Extract Hydrogen
- Catalytic-combustion-based Small-scale High-power-density Power Source
- High-performance Heat Exchanger for Small-scale Binary Cycle Systems
- Electret-based Vibration Energy Harvesting Device
Shikazono NaokiProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- High efficiency energy systems combining SOFC, heat engine and high temperature heat storage
- SOFC electrode analysis using numerical simulation and advanced microscopic technologies
- Large-scale simulation and development of thermal elemental technologies
Shinichi Warisawa
- Kashiwa Campus
- Department of Mechanical Engineering
- Graduate School of Frontier Sciences
- RESEARCH
-
- Health status estimation using daily sensing
- Wearable continuous blood pressure monitoring
Shu TakagiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Bio-Medical Application of Microbubbles
- Air-Lift Pump for Deep Ocean Mining
- Bio-Mechanical Simulation using Super-Computer
Ryo ShirakashiProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Stabilization of clinical analytes and diagnostic agents for their high quality dry-preservation
- Dielectric spectroscopy of the retained water in Lignite for estimating its low temperature oxidization.
- Delivery of cryo-/dry-protective agents into a living fish egg by the enhancement of membrane transport
- Development of the thin heat transport device equipped with the highly integrated micro grooved channels
- Dielectric spectroscopy of the slurry for electrodes (catalytic layer) for estimating its kneading state.
Hirofumi DaigujiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Next generation HVAC technology
- Adsorption and transport of water in nanospace materials
- Analysis and control of bubble generation in nanopores
- Nanofluidics and electrokinetics
Satoshi IzumiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Multi-scale simulations for various applications
- Three-dimensional finite element analysis for the loosening of bolted joint.
- Application of the molecular dynamics and finite element method to semiconductor devices
Naohiko SugitaProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Cutting/grinding technology to realize high precision and efficiency for gear
- Machining center with CFRP(carbon fiber reinforced plastic)
- Micro machining of glass with ultra short pulse laser
- Artificial knee joint designed for each patient
Yutaka TabeProfessor (Specific Visiting)
- RESEARCH
-
Yoshitaka UmenoProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Analysis of buckling behavior and associated functionalities of carbon nanotubes
- Multi-scale analysis of deformation and fracture in polymer materials
- Reaction molecular dynamics of energy device materials
- Development of multi-physics simulation methods using deep-learming
- Coarse-grained molecular dynamics simulation of boundary lubrication
- Reactive molecular dynamics simulation of chemical mechanical polishing
Nakano KimihikoProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- Interfaculty Initiative in Information Studies
- RESEARCH
-
- 先進運転支援システム(ADAS)用インターフェースの評価
- 協調型自動運転システムの社会実装
- タイヤにおける非線形振動系を利用したエナジー・ハーべスティング
- 鉄道車両における状態監視
Yudai YamasakiProfessor
- Kashiwa Campus
- Department of Mechanical Engineering
- Graduate School of Frontier Sciences
- RESEARCH
-
- Advanced engine control system, advanced combustion technology and alternative fuels
- AI application for virtual sensors and combustion analysis
- Analysis of biological signals during driving and powertrain control considering individual difference
- BCP and optimization of distributed energy system
Junichiro ShiomiProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Development of thermoelectric conversion technology based on nanotechnology
- Heat-transfer innovation by Materials Informatics (material science x information science)
- Control of interfacial fluid dynamics phenomena such as wetting and phase change and its application to heat exchange
Hayato YoshiokaProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Prediction and control of structural vibration in machine tools
- High efficiency fine patterning technology on curved surface
- Flexible manufacturing system with autonomous movable robots
- Reconfigurable manufacturing system
Gentiane VentureProfessor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Elucidation of motor control of expressive movements
- Development of intelligent expressive motion controllers
- Human-Robot interaction in the wild
Jean-Jacques DelaunayAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- All-optical force sensor using transparent elastic structures
- Surface-wave devices for bio-detection and all-optical switching
- Control of thermal emission using micro/nano structuration
Katsuko FurukawaAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- 3D Fabrication Technology
- Tissue Engineering for Uterus, Cartilage and Bone
- Bioreactor Design for Mechanical Stresses
- Real-time Imaging Technologies for Mechanical Stresses
Hidehiro OanaAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Development of individual chromosome/DNA manipulation technology and its application to epigenome analysis
- Development of on-chip cell fusion devices and its application to regenerative medicine
- Development of microfluidic devices for giant vesicle formation and its application
Kensuke TsuchiyaAssociate Professor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Mechanism of machining phenomena
- Mechanical process with high efficiency
- Smart production systems
Misato NiheiAssociate Professor
- Kashiwa Campus
- Department of Mechanical Engineering
- Graduate School of Frontier Sciences
- RESEARCH
-
- Generalization and practice of welfare equipment design theory by incorporating research qualitative research methods into equipment development Research on the development of welfare equipment and life support equipment and on comprehensive evaluation methods
- Research on the introduction of welfare equipment
- Research and development of equipment for mobility support for the elderly and disabled
Kanako HaradaAssociate Professor
- Hongo Campus
- Graduate School of Engineering
- RESEARCH
-
- Surgical robots for pediatric, eye and neurosurgery
- Automation of surgical robots
- Surgical skill assessment
Yosuke HasegawaProfessor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Optimal control of turbulent transport phenomena
- Shape optimization of thermo-fluids systems
- Mathematical modeling of vascular network remodeling
- Estimation of turbulent environments based on limited noisy sensing data
Hideyoshi YanagisawaAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Modeling perception and emotion based on neuro-information-theoretic approach
- Sense of agency and interface design
- Safety and reliable design of autonomous machines for human
- Multi-sensory design based on the first principle modeling
- Multilingual semantic words management in design process
Masamichi ShimosakaAssociate Professor (Specific Visiting)
- Hongo Campus
- Graduate School of Engineering
- RESEARCH
-
- Human behavior modeling with Inverse optimal control
- People flow modeling from massive GPS data
- Machine learning for IoT / mobile phone sensing
Shohei ChiashiAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Synthesis of nano-materials, such as carbon nanotubes, graphene, etc.
- Spectroscopic and conduction properties of nano-materials
- Material and energy transport properties at the nanoscale and their applications
Ikuya KinefuchiAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Visualization measurement and analysis of sub-micron scale water droplet condensation
- Micro- and nano-scale thermal flow analysis in polymer electrolyte fuel cells
- Development of coarse-grained visualization methods for molecular simulation
- Thermal hydraulics analysis in a compact self-excited vibration heat pipe
Rui FukuiAssociate Professor
- Kashiwa Campus
- Department of Mechanical Engineering
- Graduate School of Frontier Sciences
- RESEARCH
-
- Robot systems for track structure construction in a difficult manned environment
- Construction planning method for track structure construction robot systems
- Infinite orbit type continuous moving mechanisms for high mobility ceiling moving robots
- Direct view tele-operation interface of hydraulic excavator using tablet terminals
Muhammad AzizAssociate Professor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Highly efficient hydrogen production, storage, and utilization
- Chemical looping-based CO2-free energy conversion
- Energy-efficient waste-to-energy conversion
- Advanced utilization of electric vehicle for grid ancillary services
- Decomposition of environmental gases
Reo KometaniAssociate Professor
- Kashiwa Campus
- Department of Mechanical Engineering
- Graduate School of Frontier Sciences
- RESEARCH
-
- Development of healthcare devices and systems: Breath sensor systems
- Research on optical measurement devices for increasing the capacity of optical communications
- Ultrafine processing technology
Keisuke NagatoAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Microfabrication of functional surface
- High-speed and microscale mechanism on powder bed fusion
- Powder Process Informatics
Yuji YamakawaAssociate Professor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- Interfaculty Initiative in Information Studies
- RESEARCH
-
- Development of high-speed robot system
- Study on human-robot collaboration
- Study on dynamic manipulation
- Study on vision sensor network
- Study on intelligent production system
Tsuyoshi FurushimaAssociate Professor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Micro stamping process for medical and electromechanical compomemts
- Meso-scale material modeling considering crystal structure and surface roughenss
- Fabrication of bio and medical microtubes by dieless forming process
- Non-contact measurement techniques of plastic deformation
- Development of Intelligent metal forming process
Eita TochigiAssociate Professor
- Komaba Campus
- Graduate School of Engineering
- Institute of Industrial Science
- RESEARCH
-
- Development of experimental system for in situ TEM mechanical testing
- Microstructural observations of deformation and fracture behavior by atomic-resolution
- Investigation of dynamic behavior and atomistic mechanisms of deformation twinning
- Structural analysis of lattice defects in crystalline materials
Takayuki YamadaAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Topology optimization with manufacturability
- Construction of a geometric mathematical model for design and manufacturing and development of an optimal design system
- Topology optimization of mechanisms and generation of robots
- Optimal design of metamaterials and multi-scale design
Wei-Lun HsuAssociate Professor
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Transport phenomena at the micro/nanoscale
- Development of two-dimensional nanopore DNA sequencing devices
- Design of next generation dehumidifiers using desiccant materials
Asuka HatanoLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Multiphysics simulation of cardiomyocyte contractions
- Fluid-structure interaction analysis of aortic valve openings
- Contrast agent flow analysis in stenosed arteriole
Takuma ItoLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- User acceptance of intelligent mobility
- Human-machine shared system
- Driving environmental recognition technologies and digital maps for community roads
Masato OhnishiProject Lecturer
- Hongo Campus
- Graduate School of Engineering
- RESEARCH
-
- First-principles calculations for thermoelectric properties
- Development of anharmonic phonon property database
- Development of thermoelectric devices
Yaerim LeeLecturer
- Hongo Campus
- Graduate School of Engineering
- RESEARCH
-
- Understanding of dynamic wetting over hybrid wettability surfaces
- Development of smart surfaces to control condensation and freezing of water
- Development of scalable thermal insulation/radiation materials
Tomoaki WatamuraLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Fluid-like behavior of dispersed bodies
- Mechanics on complex interface
- Flow visualization of multiphase flow
- KEYWORD
Minhyeok LeeLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Elucidation of cool flame characteristics by measuring low-temperature oxidation species through laser/sampling diagnostics
- Elucidation of flame-wall interaction and development of surface reaction models
- Investigation of hydrogen/ammonia combustion characteristics towards carbon-neutralization
- Investigation and modeling of metal combustion under different oxidation atmospheres
Toru KizakiLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Condition monitoring of precision machine tools based on real-time estimation of machine dynamics
- Realization of high-precision thermal displacement compensation based on large-scale temperature measurement
- Development of in-process measurement technology for geometric accuracy of precision machine tools
- Development of sensor-integrated cemented carbide tools by the novel sintering process
- KEYWORD
Yuki AsanoProject Lecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Study of musculoskeletal design and motion generation of human mimetic humanoids
- Research and development of robot module/device
- Social implementation/application of robot technology in the real world
Timothée MouterdeLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Nanostructured metamaterials for fluid repellency
- Fluids and ions control at the molecular scale
- Nanofluidics
Moju ZhaoProject Lecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Dexterous Aerial Manipulation by Transformable Aerial Robot
- Autonomous Surveillance by Multimodel Sensing
- Cooperative Air-Ground Robotic System for Surveillance and Inspection
Yusuke ItoLecturer
- Hongo Campus
- Department of Mechanical Engineering
- Graduate School of Engineering
- RESEARCH
-
- Ultrafast laser processing by high-speed control of electron density
- Precision laser processing with high-speed monitoring and feedback
- Ultrafast quantitative imaging of electron-phonon interaction process
- Deformation mechanism of cells by ultrafast biological stress imaging